Packaging Information by Product Group
Grouped documentation for selected SKUs from the 2026 product list
Scope. Products are grouped by the same base dimensions. One packaging information card covers all selected SKUs listed within that group. Blank, printed, language and other SKU variants of the same size are therefore covered together.
| Individual bag | Every product is packed in one individual polypropylene (PP) bag, thickness 30 µm. For flat-packed products, bag dimensions are estimated from the product dimensions with an handling allowance. Large gaming / board-game mats use the standard 1150 × 450 mm PP bag previously defined for GAM XL Long+. |
| Outer carton | Every product is additionally packed in an outer master carton made from 3-layer corrugated cardboard. For this estimation, the empty carton weight is standardized at 0.5 kg for every product group. Carton dimensions are estimated from product dimensions and the number of units packed per carton. |
| Packing tape | Master cartons are closed with BOPP/PP packing tape with acrylic adhesive, width 48 mm. Standard consumption used for calculations: approx. 3 m per carton and approx. 10 g per carton. |
| Data status | All previously unconfirmed packaging values have been replaced with estimated values. Where carton quantity was available in the source product list, that value was used; if several values occurred within one dimension group, the lowest (most conservative) quantity was applied. Where no carton quantity was provided, it was estimated from product dimensions and product weight. |
Total dimension groups covered: 34
Packaging Information for 10 × 10 cm Products
Product group 1/34 | Base dimensions: 10 × 10 cm | Thickness values in source list: 0.3 cm
| Selected SKUs covered by this packaging information CP(00)[FS], CP(00)[B] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 15 × 15 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 1 g |
| Outer shipping carton | Outer transport packaging used for 500 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 22 × 22 × 39.5 cm | 0.0020 pc (1 carton / 500 products) | Approx. 1.00 g (0.5 kg carton / 500 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.006 m (3 m / 500 products) | Approx. 0.02 g (10 g tape / 500 products) |
Packaging summary
| Packaging configuration | 500 individual PP bags + 1 master carton + approx. 3 m packing tape per 500 product units |
| Total packaging weight per product unit | Approx. 2.02 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (500 pcs.) is taken from the source product list.
Packaging Information for 14 × 8 cm Products
Product group 2/34 | Base dimensions: 14 × 8 cm | Thickness values in source list: 2 cm
| Selected SKUs covered by this packaging information MFWR [B], MFWR [FT] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 19 × 13 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 1.5 g |
| Outer shipping carton | Outer transport packaging used for 500 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 42 × 58 × 52 cm | 0.0020 pc(1 carton / 500 products) | Approx. 1.00 g(0.5 kg carton / 500 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mmApprox. 3 m per carton | Approx. 0.006 m(3 m / 500 products) | Approx. 0.02 g(10 g tape / 500 products) |
Packaging summary
| Packaging configuration | 500 individual PP bags + 1 master carton + approx. 3 m packing tape per 500 product units |
| Total packaging weight per product unit | Approx. 2.52 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (500 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 15 × 48 cm Products
Product group 3/34 | Base dimensions: 15 × 48 cm | Thickness values in source list: 0.1 cm
| Selected SKUs covered by this packaging information FP [G] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packagingcomponent | Description | Material | Dimensions /parameters | Quantity perproduct | Weight perproduct |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 20 × 53 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 6 g |
| Outer shipping carton | Outer transport packaging used for 500 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 32 × 50 × 27 cm | 0.0020 pc(1 carton / 500 products) | Approx. 1.00 g(0.5 kg carton / 500 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mmApprox. 3 m per carton | Approx. 0.006 m(3 m / 500 products) | Approx. 0.02 g(10 g tape / 500 products) |
Packaging summary
| Packaging configuration | 500 individual PP bags + 1 master carton + approx. 3 m packing tape per 500 product units |
| Total packaging weight per product unit | Approx. 7.02 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (500 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 19 × 23 cm Products
Product group 4/34 | Base dimensions: 19 × 23 cm | Thickness values in source list: 2 cm
| Selected SKUs covered by this packaging information GMP(01)[B], GMP(01)[2], GMP(01)[3], GMP(01)[FT], GMP(01)[FS], GMP(01)[1], GMP(03)[B], GMP(03)[2], GMP(03)[3], GMP(03)[FT], GMP(03)[FS], GMP(03)[1], GMP(04)[B], GMP(04)[2], GMP(04)[3], GMP(04)[FT], GMP(04)[FS], GMP(04)[1], GMP(05)[B], GMP(05)[2], GMP(05)[3], GMP(05)[FT], GMP(05)[FS], GMP(05)[1], GMP(06)[B], GMP(06)[2], GMP(06)[3], GMP(06)[FT], GMP(06)[FS], GMP(06)[1], GMP+(01)[B], GMP+(01)[2], GMP+(01)[3], GMP+(01)[FT], GMP+(01)[FS], GMP+(01)[1], GMP+(04)[1], GMP+(04)[2], GMP+(04)[3], GMP+(04)[B], GMP+(04)[FT], GMP+(04)[FS], GMP+(05)[1], GMP+(05)[2], GMP+(05)[3], GMP+(05)[B], GMP+(05)[FT], GMP+(05)[FS], GMP(00)[FS], GMP(07)[B], GMP(07)[FT], GMP(07)[1], GMP(07)[2], GMP(07)[3], GMP(07)[FS], GMP(00)[B], GMP+(07)[B], GMP+(07)[1], GMP+(07)[2], GMP+(07)[3], GMP+(07)[FT], GMP+(07)[FS], GMP(02)[1], GMP(02)[2], GMP(02)[3], GMP(02)[B], GMP(02)[FT], GMP(02)[FS], GMP(01)Light [B], GMP(01)Light [1], GMP(01)Light [2], GMP(01)Light [3], GMP(01)Light [FT], GMP(01)Light [FS], GMP_WHITE, GMP_GRAY, GMP_BLACK, GMP_NAVY_BLUE, GMP_BLUE, GMP_RED, GMP_GREEN, GMP_PINK, GMP(00)[B]-2, GMP(00)[FS]-2, GMP(00)[FS+]-2, GMP(00)[B]-3, GMP(00)[FS]-3, GMP(00)[FS+]-3, GMP(00)[B]-4, GMP(00)[FS]-4, GMP(00)[FS+]-4, GMP(00)[B]-5, GMP(00)[FS]-5, GMP(00)[FS+]-5, GMP(00)[B]-6, GMP(00)[FS]-6, GMP(00)[FS+]-6 |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 24 × 28 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 3.5 g |
| Outer shipping carton | Outer transport packaging used for 200 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 48 × 78 × 52 cm | 0.0050 pc (1 carton / 200 products) | Approx. 2.50 g (0.5 kg carton / 200 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.015 m (3 m / 200 products) | Approx. 0.05 g (10 g tape / 200 products) |
Packaging summary
| Packaging configuration | 200 individual PP bags + 1 master carton + approx. 3 m packing tape per 200 product units |
| Total packaging weight per product unit | Approx. 6.05 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (200 pcs.) is taken from the source product list.
Packaging Information for 20 × 23 cm Products
Product group 5/34 | Base dimensions: 20 × 23 cm | Thickness values in source list: 1, 2 cm
| Selected SKUs covered by this packaging information SMP(04)[1], SMP(04)[2], SMP(04)[3], SMP(04)[B], SMP(04)[FT], SMP(05)[1], SMP(05)[2], SMP(05)[3], SMP(05)[B], SMP(05)[FT], SMP(02)[1], SMP(02)[2], SMP(02)[3], SMP(02)[B], SMP(02)[FT], GMP_PRO(02)[1], GMP_PRO(02)[2], GMP_PRO(02)[B], GMP_PRO(02)[FT], GMP_PRO(02)[FS], GMP_PRO(01)[1], GMP_PRO(01)[2], GMP_PRO(01)[B], GMP_PRO(01)[FT], GMP_PRO(01)[FS], SMP PRO (02)[1], SMP PRO (02)[2], SMP PRO (02)[3], SMP PRO (02)[B], SMP PRO (02)[FT], SMP_PRO(04)[1], SMP_PRO(04)[2], SMP_PRO(04)[3], SMP_PRO(04)[B], SMP_PRO(04)[FT], SMP_PRO(00)[1], SMP_PRO(00)[2], SMP_PRO(00)[3], SMP_PRO(00)[B], SMP_PRO(00)[FT], SMP_PRO(05)[1], SMP_PRO(05)[2], SMP_PRO(05)[3], SMP_PRO(05)[B], SMP_PRO(05)[FT], GMP_PRO(01)[3], GMP_PRO(02)[3], GMP_PRO(03)[B], GMP_PRO(03)[1], GMP_PRO(03)[2], GMP_PRO(03)[3], GMP_PRO(03)[FT], GMP_PRO(03)[FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 25 × 28 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4 g |
| Outer shipping carton | Outer transport packaging used for 150 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 48 × 62 × 52 cm | 0.0067 pc (1 carton / 150 products) | Approx. 3.33 g (0.5 kg carton / 150 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.020 m (3 m / 150 products) | Approx. 0.07 g (10 g tape / 150 products) |
Packaging summary
| Packaging configuration | 150 individual PP bags + 1 master carton + approx. 3 m packing tape per 150 product units |
| Total packaging weight per product unit | Approx. 7.40 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (150 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 20 × 30 cm Products
Product group 6/34 | Base dimensions: 20 × 30 cm | Thickness values in source list: 0.1 cm
| Selected SKUs covered by this packaging information 5in1(00) XL[B], 5in1(00) XL[FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 25 × 35 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 5 g |
| Outer shipping carton | Outer transport packaging used for 500 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 32 × 42 × 27 cm | 0.0020 pc (1 carton / 500 products) | Approx. 1.00 g (0.5 kg carton / 500 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.006 m (3 m / 500 products) | Approx. 0.02 g (10 g tape / 500 products) |
Packaging summary
| Packaging configuration | 500 individual PP bags + 1 master carton + approx. 3 m packing tape per 500 product units |
| Total packaging weight per product unit | Approx. 6.02 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (500 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 21 × 27 cm Products
Product group 7/34 | Base dimensions: 21 × 27 cm | Thickness values in source list: 0.5 cm
| Selected SKUs covered by this packaging information B+[FC], B[B], BP+[FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 26 × 32 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4.5 g |
| Outer shipping carton | Outer transport packaging used for 400 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 44 × 56 × 52 cm | 0.0025 pc (1 carton / 400 products) | Approx. 1.25 g (0.5 kg carton / 400 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.007 m (3 m / 400 products) | Approx. 0.03 g (10 g tape / 400 products) |
Packaging summary
| Packaging configuration | 400 individual PP bags + 1 master carton + approx. 3 m packing tape per 400 product units |
| Total packaging weight per product unit | Approx. 5.78 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (400 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 21 × 29 cm Products
Product group 8/34 | Base dimensions: 21 × 29 cm | Thickness values in source list: 0.5 cm
| Selected SKUs covered by this packaging information SUBP(00)[B], SUBP(00)[FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 26 × 34 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 5 g |
| Outer shipping carton | Outer transport packaging used for 80 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 23 × 31 × 42 cm | 0.0125 pc (1 carton / 80 products) | Approx. 6.25 g (0.5 kg carton / 80 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.037 m (3 m / 80 products) | Approx. 0.12 g (10 g tape / 80 products) |
Packaging summary
| Packaging configuration | 80 individual PP bags + 1 master carton + approx. 3 m packing tape per 80 product units |
| Total packaging weight per product unit | Approx. 11.38 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (80 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 21 × 29.7 cm Products
Product group 9/34 | Base dimensions: 21 × 29.7 cm | Thickness values in source list: 0.15 cm
| Selected SKUs covered by this packaging information A4 Insert Pocket [B], A4 Insert Pocket [FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 26 × 34.7 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 5 g |
| Outer shipping carton | Outer transport packaging used for 500 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 31.7 × 44 × 39.5 cm | 0.0020 pc (1 carton / 500 products) | Approx. 1.00 g (0.5 kg carton / 500 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.006 m (3 m / 500 products) | Approx. 0.02 g (10 g tape / 500 products) |
Packaging summary
| Packaging configuration | 500 individual PP bags + 1 master carton + approx. 3 m packing tape per 500 product units |
| Total packaging weight per product unit | Approx. 6.02 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (500 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 21 × 38 cm Products
Product group 10/34 | Base dimensions: 21 × 38 cm | Thickness values in source list: 0.5 cm
| Selected SKUs covered by this packaging information SUBPC(00)[B], SUBPC(00)[FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 26 × 43 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 6 g |
| Outer shipping carton | Outer transport packaging used for 50 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 23 × 40 × 27 cm | 0.0200 pc (1 carton / 50 products) | Approx. 10.00 g (0.5 kg carton / 50 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.060 m (3 m / 50 products) | Approx. 0.20 g (10 g tape / 50 products) |
Packaging summary
| Packaging configuration | 50 individual PP bags + 1 master carton + approx. 3 m packing tape per 50 product units |
| Total packaging weight per product unit | Approx. 16.20 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (50 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 21.5 × 24 cm Products
Product group 11/34 | Base dimensions: 21.5 × 24 cm | Thickness values in source list: 0.1 cm
| Selected SKUs covered by this packaging information FP [S] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 26.5 × 29 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4 g |
| Outer shipping carton | Outer transport packaging used for 500 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 26 × 45 × 27 cm | 0.0020 pc (1 carton / 500 products) | Approx. 1.00 g (0.5 kg carton / 500 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.006 m (3 m / 500 products) | Approx. 0.02 g (10 g tape / 500 products) |
Packaging summary
| Packaging configuration | 500 individual PP bags + 1 master carton + approx. 3 m packing tape per 500 product units |
| Total packaging weight per product unit | Approx. 5.02 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (500 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 22 × 16.5 cm Products
Product group 12/34 | Base dimensions: 22 × 16.5 cm | Thickness values in source list: 0.1 cm
| Selected SKUs covered by this packaging information 5in1(00)[B], 5in1(00)[FS], 5in1e(00)[FS], 5in1e(00)[B] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 27 × 21.5 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 3 g |
| Outer shipping carton | Outer transport packaging used for 100 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 18.5 × 24 × 12 cm | 0.0100 pc (1 carton / 100 products) | Approx. 5.00 g (0.5 kg carton / 100 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.030 m (3 m / 100 products) | Approx. 0.10 g (10 g tape / 100 products) |
Packaging summary
| Packaging configuration | 100 individual PP bags + 1 master carton + approx. 3 m packing tape per 100 product units |
| Total packaging weight per product unit | Approx. 8.10 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (100 pcs.) is taken from the source product list.
Packaging Information for 22 × 18 cm Products
Product group 13/34 | Base dimensions: 22 × 18 cm | Thickness values in source list: 0.15, 1, 1.5 cm
| Selected SKUs covered by this packaging information SMP rec(00)[B], SMP rec(00)[FS], SMP+ rec(00)[B], SMP+ rec(00)[FS], P2S[FC], P3S[FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 27 × 23 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 3.5 g |
| Outer shipping carton | Outer transport packaging used for 200 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 46 × 74 × 39.5 cm | 0.0050 pc (1 carton / 200 products) | Approx. 2.50 g (0.5 kg carton / 200 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.015 m (3 m / 200 products) | Approx. 0.05 g (10 g tape / 200 products) |
Packaging summary
| Packaging configuration | 200 individual PP bags + 1 master carton + approx. 3 m packing tape per 200 product units |
| Total packaging weight per product unit | Approx. 6.05 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (200 pcs.) is taken from the source product list.
Packaging Information for 22 × 22 cm Products
Product group 14/34 | Base dimensions: 22 × 22 cm | Thickness values in source list: 0.3 cm
| Selected SKUs covered by this packaging information SUBR(00)[FS], SUBR(00)[B] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 27 × 27 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4 g |
| Outer shipping carton | Outer transport packaging used for 100 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 24 × 24 × 32 cm | 0.0100 pc (1 carton / 100 products) | Approx. 5.00 g (0.5 kg carton / 100 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.030 m (3 m / 100 products) | Approx. 0.10 g (10 g tape / 100 products) |
Packaging summary
| Packaging configuration | 100 individual PP bags + 1 master carton + approx. 3 m packing tape per 100 product units |
| Total packaging weight per product unit | Approx. 9.10 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (100 pcs.) is taken from the source product list.
Packaging Information for 23 × 18 cm Products
Product group 15/34 | Base dimensions: 23 × 18 cm | Thickness values in source list: 0.3, 0.5 cm
| Selected SKUs covered by this packaging information K1 blank[B], K1[PU]_PL, K1[PU]_DE, K1[PU]_EN, K2[PU]_EN, K2[PU]_DE, K2[PU]_PL, K1[PU]_IT, K1[PU]_FR, K2[PU]_IT, K2[PU]_FR, K1[PU]_LT, K2[PU]_LT, K2[PU]_PL-4, K2[PU]_EN-4, K2[PU]_DE-4, K2[PU]_FR-4, K2[PU]_IT-4, K2[PU]_LT-4, K2[PU]_PL-5, K2[PU]_EN-5, K2[PU]_DE-5, K2[PU]_FR-5, K2[PU]_IT-5, K2[PU]_LT-5, K2[PU]_PL-6, K2[PU]_EN-6, K2[PU]_DE-6, K2[PU]_FR-6, K2[PU]_IT-6, K2[PU]_LT-6, K2[PU]_PL-7, K2[PU]_EN-7, K2[PU]_DE-7, K2[PU]_FR-7, K2[PU]_IT-7, K2[PU]_LT-7, K2[PU]_PL-8, K2[PU]_EN-8, K2[PU]_DE-8, K2[PU]_FR-8, K2[PU]_IT-8, K2[PU]_LT-8 |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 28 × 23 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 3.5 g |
| Outer shipping carton | Outer transport packaging used for 200 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 38 × 48 × 27 cm | 0.0050 pc (1 carton / 200 products) | Approx. 2.50 g (0.5 kg carton / 200 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.015 m (3 m / 200 products) | Approx. 0.05 g (10 g tape / 200 products) |
Packaging summary
| Packaging configuration | 200 individual PP bags + 1 master carton + approx. 3 m packing tape per 200 product units |
| Total packaging weight per product unit | Approx. 6.05 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (200 pcs.) is taken from the source product list.
Packaging Information for 23 × 19 cm Products
Product group 16/34 | Base dimensions: 23 × 19 cm | Thickness values in source list: 0.3, 0.5 cm
| Selected SKUs covered by this packaging information SUBW(00)[FS], SUBW(00)[B], SUB(00)_[B], SUB(00)_[FS], SUB(00)[B], SUB(00)[FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 28 × 24 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 3.5 g |
| Outer shipping carton | Outer transport packaging used for 250 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 40 × 48 × 33.5 cm | 0.0040 pc (1 carton / 250 products) | Approx. 2.00 g (0.5 kg carton / 250 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.012 m (3 m / 250 products) | Approx. 0.04 g (10 g tape / 250 products) |
Packaging summary
| Packaging configuration | 250 individual PP bags + 1 master carton + approx. 3 m packing tape per 250 product units |
| Total packaging weight per product unit | Approx. 5.54 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (250 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 23 × 20 cm Products
Product group 17/34 | Base dimensions: 23 × 20 cm | Thickness values in source list: 0.22, 1 cm
| Selected SKUs covered by this packaging information SMP(00)[B], SMP(00)[FS], SMP+(00)[B], SMP+(00)[FS], TMP (02)[B], TMP (02)[FC], TMP (04)[B], TMP (04)[FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 28 × 25 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4 g |
| Outer shipping carton | Outer transport packaging used for 50 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 25 × 42 × 27 cm | 0.0200 pc (1 carton / 50 products) | Approx. 10.00 g (0.5 kg carton / 50 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.060 m (3 m / 50 products) | Approx. 0.20 g (10 g tape / 50 products) |
Packaging summary
| Packaging configuration | 50 individual PP bags + 1 master carton + approx. 3 m packing tape per 50 product units |
| Total packaging weight per product unit | Approx. 14.20 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The source list contains carton quantities of 50, 200 pcs.; for this grouped specification, the conservative value of 50 pcs. per carton is used.
Packaging Information for 24 × 20 cm Products
Product group 18/34 | Base dimensions: 24 × 20 cm | Thickness values in source list: 0, 0.3, 0.5 cm
| Selected SKUs covered by this packaging information SUBS (02)[B], SUBS (02)[FC], SUBS (00)[FS], SUBS (00)[B], SUB_C, SUBS (00)[B3], SUBS (00)[FS3] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 29 × 25 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4 g |
| Outer shipping carton | Outer transport packaging used for 100 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 26 × 42 × 27 cm | 0.0100 pc (1 carton / 100 products) | Approx. 5.00 g (0.5 kg carton / 100 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.030 m (3 m / 100 products) | Approx. 0.10 g (10 g tape / 100 products) |
Packaging summary
| Packaging configuration | 100 individual PP bags + 1 master carton + approx. 3 m packing tape per 100 product units |
| Total packaging weight per product unit | Approx. 9.10 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (100 pcs.) is taken from the source product list.
Packaging Information for 25 × 22.5 cm Products
Product group 19/34 | Base dimensions: 25 × 22.5 cm | Thickness values in source list: 4 cm
| Selected SKUs covered by this packaging information GMP XL(02)[B], GMP XL(02)[1], GMP XL(02)[2], GMP XL(02)[3], GMP XL(02)[FT], GMP XL(02)[FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 30 × 27.5 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4.5 g |
| Outer shipping carton | Outer transport packaging used for 200 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 77 × 92 × 70 cm | 0.0050 pc (1 carton / 200 products) | Approx. 2.50 g (0.5 kg carton / 200 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.015 m (3 m / 200 products) | Approx. 0.05 g (10 g tape / 200 products) |
Packaging summary
| Packaging configuration | 200 individual PP bags + 1 master carton + approx. 3 m packing tape per 200 product units |
| Total packaging weight per product unit | Approx. 7.05 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (200 pcs.) is taken from the source product list.
Packaging Information for 29 × 23 cm Products
Product group 20/34 | Base dimensions: 29 × 23 cm | Thickness values in source list: 5 cm
| Selected SKUs covered by this packaging information GS (00)[FC], GS (00)[B], GS (02)[B], GS (02)[FC], GS (04)[B], GS (04)[FC], GS (05)[B], GS (05)[FC], GS_a (00)[B], GS_a (00)[FC], GS_a (02)[B], GS_a (02)[FC], GS_a (04)[B], GS_a (04)[FC], GS_a (05)[B], GS_a (05)[FC], GS_b (00)[B], GS_b (00)[FC], GS_b (02)[B], GS_b (02)[FC], GS_b (04)[B], GS_b (04)[FC], GS_b (05)[B], GS_b (05)[FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 34 × 28 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 5 g |
| Outer shipping carton | Outer transport packaging used for 40 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 48 × 60 × 52 cm | 0.0250 pc (1 carton / 40 products) | Approx. 12.50 g (0.5 kg carton / 40 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.075 m (3 m / 40 products) | Approx. 0.25 g (10 g tape / 40 products) |
Packaging summary
| Packaging configuration | 40 individual PP bags + 1 master carton + approx. 3 m packing tape per 40 product units |
| Total packaging weight per product unit | Approx. 17.75 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (40 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 29.7 × 42 cm Products
Product group 21/34 | Base dimensions: 29.7 × 42 cm | Thickness values in source list: 0.15 cm
| Selected SKUs covered by this packaging information A3 Insert Pocket [B], A3 Insert Pocket [FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 34.7 × 47 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 9 g |
| Outer shipping carton | Outer transport packaging used for 300 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 31.7 × 44 × 47 cm | 0.0033 pc (1 carton / 300 products) | Approx. 1.67 g (0.5 kg carton / 300 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.010 m (3 m / 300 products) | Approx. 0.03 g (10 g tape / 300 products) |
Packaging summary
| Packaging configuration | 300 individual PP bags + 1 master carton + approx. 3 m packing tape per 300 product units |
| Total packaging weight per product unit | Approx. 10.70 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (300 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 31.5 × 21 cm Products
Product group 22/34 | Base dimensions: 31.5 × 21 cm | Thickness values in source list: 0.5 cm
| Selected SKUs covered by this packaging information SUBPT(00)[B], SUBPT(00)[FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 36.5 × 26 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 5 g |
| Outer shipping carton | Outer transport packaging used for 50 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 23 × 33.5 × 27 cm | 0.0200 pc (1 carton / 50 products) | Approx. 10.00 g (0.5 kg carton / 50 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.060 m (3 m / 50 products) | Approx. 0.20 g (10 g tape / 50 products) |
Packaging summary
| Packaging configuration | 50 individual PP bags + 1 master carton + approx. 3 m packing tape per 50 product units |
| Total packaging weight per product unit | Approx. 15.20 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (50 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 34 × 29 cm Products
Product group 23/34 | Base dimensions: 34 × 29 cm | Thickness values in source list: 0.3 cm
| Selected SKUs covered by this packaging information GAM M (00)[B], GAM M (00)[FS], GAM M (02)[FT], GAM M (02)[B] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 39 × 34 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 7 g |
| Outer shipping carton | Outer transport packaging used for 100 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 31 × 36 × 32 cm | 0.0100 pc (1 carton / 100 products) | Approx. 5.00 g (0.5 kg carton / 100 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.030 m (3 m / 100 products) | Approx. 0.10 g (10 g tape / 100 products) |
Packaging summary
| Packaging configuration | 100 individual PP bags + 1 master carton + approx. 3 m packing tape per 100 product units |
| Total packaging weight per product unit | Approx. 12.10 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (100 pcs.) is taken from the source product list.
Packaging Information for 43 × 7.6 cm Products
Product group 24/34 | Base dimensions: 43 × 7.6 cm | Thickness values in source list: 1.6 cm
| Selected SKUs covered by this packaging information TU430 [B], TU430 [FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 48 × 12.6 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 3.5 g |
| Outer shipping carton | Outer transport packaging used for 100 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 40 × 45 × 34 cm | 0.0100 pc (1 carton / 100 products) | Approx. 5.00 g (0.5 kg carton / 100 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.030 m (3 m / 100 products) | Approx. 0.10 g (10 g tape / 100 products) |
Packaging summary
| Packaging configuration | 100 individual PP bags + 1 master carton + approx. 3 m packing tape per 100 product units |
| Total packaging weight per product unit | Approx. 8.60 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (100 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 44 × 25 cm Products
Product group 25/34 | Base dimensions: 44 × 25 cm | Thickness values in source list: 0.15 cm
| Selected SKUs covered by this packaging information BM (00)[FS], BM (00)[B] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 49 × 30 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 8 g |
| Outer shipping carton | Outer transport packaging used for 100 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 27 × 46 × 17 cm | 0.0100 pc (1 carton / 100 products) | Approx. 5.00 g (0.5 kg carton / 100 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.030 m (3 m / 100 products) | Approx. 0.10 g (10 g tape / 100 products) |
Packaging summary
| Packaging configuration | 100 individual PP bags + 1 master carton + approx. 3 m packing tape per 100 product units |
| Total packaging weight per product unit | Approx. 13.10 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (100 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 45 × 33 cm Products
Product group 26/34 | Base dimensions: 45 × 33 cm | Thickness values in source list: 0.5 cm
| Selected SKUs covered by this packaging information K4 FPF, K4 FPS |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 50 × 38 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 10.5 g |
| Outer shipping carton | Outer transport packaging used for 80 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 35 × 47 × 42 cm | 0.0125 pc (1 carton / 80 products) | Approx. 6.25 g (0.5 kg carton / 80 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.037 m (3 m / 80 products) | Approx. 0.12 g (10 g tape / 80 products) |
Packaging summary
| Packaging configuration | 80 individual PP bags + 1 master carton + approx. 3 m packing tape per 80 product units |
| Total packaging weight per product unit | Approx. 16.88 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (80 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 47 × 5 cm Products
Product group 27/34 | Base dimensions: 47 × 5 cm | Thickness values in source list: 1 cm
| Selected SKUs covered by this packaging information KWR(02)[B], KWR(02)[FT] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 52 × 10 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 3 g |
| Outer shipping carton | Outer transport packaging used for 50 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 17 × 49 × 19 cm | 0.0200 pc (1 carton / 50 products) | Approx. 10.00 g (0.5 kg carton / 50 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.060 m (3 m / 50 products) | Approx. 0.20 g (10 g tape / 50 products) |
Packaging summary
| Packaging configuration | 50 individual PP bags + 1 master carton + approx. 3 m packing tape per 50 product units |
| Total packaging weight per product unit | Approx. 13.20 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (50 pcs.) is taken from the source product list.
Packaging Information for 48 × 38 cm Products
Product group 28/34 | Base dimensions: 48 × 38 cm | Thickness values in source list: 0.3 cm
| Selected SKUs covered by this packaging information GAM L(00)[B], GAM L(00)[FS], GAM L(02)[B], GAM L(02)[FC] |
Packing method: ROLLED – the large-format product is rolled before being placed in the standard individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 115 × 45 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 30 g |
| Outer shipping carton | Outer transport packaging used for 50 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 40 × 50 × 17 cm | 0.0200 pc (1 carton / 50 products) | Approx. 10.00 g (0.5 kg carton / 50 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.060 m (3 m / 50 products) | Approx. 0.20 g (10 g tape / 50 products) |
Packaging summary
| Packaging configuration | 50 individual PP bags + 1 master carton + approx. 3 m packing tape per 50 product units |
| Total packaging weight per product unit | Approx. 40.20 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (50 pcs.) is taken from the source product list.
Packaging Information for 50 × 50 cm Products
Product group 29/34 | Base dimensions: 50 × 50 cm | Thickness values in source list: 0.1 cm
| Selected SKUs covered by this packaging information BGM [B], BGM [FS] |
Packing method: ROLLED – the large-format product is rolled before being placed in the standard individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 115 × 45 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 30 g |
| Outer shipping carton | Outer transport packaging used for 40 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 52 × 52 × 6 cm | 0.0250 pc (1 carton / 40 products) | Approx. 12.50 g (0.5 kg carton / 40 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.075 m (3 m / 40 products) | Approx. 0.25 g (10 g tape / 40 products) |
Packaging summary
| Packaging configuration | 40 individual PP bags + 1 master carton + approx. 3 m packing tape per 40 product units |
| Total packaging weight per product unit | Approx. 42.75 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (40 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 53 × 7.6 cm Products
Product group 30/34 | Base dimensions: 53 × 7.6 cm | Thickness values in source list: 1.6 cm
| Selected SKUs covered by this packaging information TU530 [B], TU530 [FC] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 58 × 12.6 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 4 g |
| Outer shipping carton | Outer transport packaging used for 100 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 40 × 55 × 34 cm | 0.0100 pc (1 carton / 100 products) | Approx. 5.00 g (0.5 kg carton / 100 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.030 m (3 m / 100 products) | Approx. 0.10 g (10 g tape / 100 products) |
Packaging summary
| Packaging configuration | 100 individual PP bags + 1 master carton + approx. 3 m packing tape per 100 product units |
| Total packaging weight per product unit | Approx. 9.10 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (100 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 60 × 40 cm Products
Product group 31/34 | Base dimensions: 60 × 40 cm | Thickness values in source list: 0.15, 0.2, 0.3 cm
| Selected SKUs covered by this packaging information P2L[FC], P3L[FC], GAM XL (02)[FT], GAM XL (02)[B], GAM XL+ (00)[B], GAM XL+ (00)[FS], GAM XL rpet (00)[FS], GAM XL rpet (00)[B], GAM XL (00) [B], GAM XL (00) [FS] |
Packing method: LARGE FORMAT – gaming SKUs are rolled before bagging. For packaging-material calculation, the standard 1150 × 450 mm PP bag is applied to all selected SKUs in this size group.
Rolled SKUs: GAM XL (02)[FT], GAM XL (02)[B], GAM XL+ (00)[B], GAM XL+ (00)[FS], GAM XL rpet (00)[FS], GAM XL rpet (00)[B], GAM XL (00) [B], GAM XL (00) [FS]
Flat SKUs: P2L[FC], P3L[FC]
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 115 × 45 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 30 g |
| Outer shipping carton | Outer transport packaging used for 50 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 42 × 62 × 17 cm | 0.0200 pc (1 carton / 50 products) | Approx. 10.00 g (0.5 kg carton / 50 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.060 m (3 m / 50 products) | Approx. 0.20 g (10 g tape / 50 products) |
Packaging summary
| Packaging configuration | 50 individual PP bags + 1 master carton + approx. 3 m packing tape per 50 product units |
| Total packaging weight per product unit | Approx. 40.20 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The source list contains carton quantities of 50, 80, 100 pcs.; for this grouped specification, the conservative value of 50 pcs. per carton is used.
Packaging Information for 70 × 35 cm Products
Product group 32/34 | Base dimensions: 70 × 35 cm | Thickness values in source list: 0.3 cm
| Selected SKUs covered by this packaging information GAM XL SLIM (00) [B], GAM XL SLIM (00) [FS] |
Packing method: ROLLED – the large-format product is rolled before being placed in the standard individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 115 × 45 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 30 g |
| Outer shipping carton | Outer transport packaging used for 40 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 37 × 72 × 14 cm | 0.0250 pc (1 carton / 40 products) | Approx. 12.50 g (0.5 kg carton / 40 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.075 m (3 m / 40 products) | Approx. 0.25 g (10 g tape / 40 products) |
Packaging summary
| Packaging configuration | 40 individual PP bags + 1 master carton + approx. 3 m packing tape per 40 product units |
| Total packaging weight per product unit | Approx. 42.75 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (40 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 75 × 45 cm Products
Product group 33/34 | Base dimensions: 75 × 45 cm | Thickness values in source list: 0.7 cm
| Selected SKUs covered by this packaging information SoftCarpet XL [B], SoftCarpet XL [FS] |
Packing method: FLAT – the product is placed flat in the individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 80 × 50 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 22 g |
| Outer shipping carton | Outer transport packaging used for 50 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 47 × 77 × 37 cm | 0.0200 pc (1 carton / 50 products) | Approx. 10.00 g (0.5 kg carton / 50 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.060 m (3 m / 50 products) | Approx. 0.20 g (10 g tape / 50 products) |
Packaging summary
| Packaging configuration | 50 individual PP bags + 1 master carton + approx. 3 m packing tape per 50 product units |
| Total packaging weight per product unit | Approx. 32.20 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (50 pcs.) is an estimate based on the product dimensions and product weight available in the source list.
Packaging Information for 90 × 40 cm Products
Product group 34/34 | Base dimensions: 90 × 40 cm | Thickness values in source list: 0.3 cm
| Selected SKUs covered by this packaging information GAM XL Long (00)[FS], GAM XL Long (00)[B], GAM XL Long (02)[FT], GAM XL Long (02)[B], GAM XL Long+ (00)[B], GAM XL Long+ (00)[FS], GAM XL Long rpet (00)[FS], GAM XL Long rpet (00)[B], GAM XL Long+ rpet (00) [B], GAM XL Long+ rpet (00) [FS] |
Packing method: ROLLED – the large-format product is rolled before being placed in the standard individual PP bag and then packed into the master carton.
Packaging components per one product unit
| Packaging component | Description | Material | Dimensions / parameters | Quantity per product | Weight per product |
|---|---|---|---|---|---|
| Individual plastic bag | Individual protective packaging used for each product. Protects against dust, dirt and moisture during storage and transportation. | Polypropylene (PP) | 115 × 45 cm Thickness: 30 µm Estimated / standard packaging dimension | 1 pc | Approx. 30 g |
| Outer shipping carton | Outer transport packaging used for 25 products. Provides mechanical protection during storage and transportation. | 3-layer corrugated cardboard | Estimated external dimensions: 42 × 92 × 10 cm | 0.0400 pc (1 carton / 25 products) | Approx. 20.00 g (0.5 kg carton / 25 products) |
| Packing tape | Packing tape used to close and secure the outer shipping carton during storage and transportation. | BOPP / PP with acrylic adhesive | Width: 48 mm Approx. 3 m per carton | Approx. 0.120 m (3 m / 25 products) | Approx. 0.40 g (10 g tape / 25 products) |
Packaging summary
| Packaging configuration | 25 individual PP bags + 1 master carton + approx. 3 m packing tape per 25 product units |
| Total packaging weight per product unit | Approx. 50.40 g |
Documentation note: All packaging dimensions and weights shown in this card are estimated values for packaging calculation purposes. A standard empty master-carton weight of 0.5 kg is assumed. The carton quantity (25 pcs.) is taken from the source product list.